欢迎访问:济南赢彩数码科技有限公司官方网站
服务热线
187-6406-8302
当前位置:主页 > 公司动态 >

背景墙打印机的LED灯的保养方法

文章出处:未知 作者:colour 人气: 时间:2017-05-16 09:46 【
经常使用瓷砖背景墙打印机的老用户都知道,uv平板打印机能够即打即干要归功于uv灯,所以uv灯保养和维护显得格外重要,维护好即可减少成本也可延长使用寿命。济南赢彩小编就为大家介绍下uv灯五点保养方法
Often use of tiles backdrop printer old users all know, uv flatbed printer can be done that is due to uv lamp, so uv lamp maintenance and maintenance is particularly important to maintain the cost can also reduce the service life can be extended. Jinan win color Xiaobian for everyone to introduce the next uv lamp five maintenance methods
 
第一、不要频繁的去开关UV灯,如果频繁地开关是会减少灯管的使用寿命。
First, do not frequently switch to UV light, if the frequent switch is to reduce the lamp life.
 
第二、uv平板打印机工作时,要保证室内温度在18-30度之间。如果超过30度,很容易导致散热不良,从而使灯管表面温度超过允许范围,减少灯管的寿命。
Second, uv flatbed printer work, to ensure that the indoor temperature between 18-30 degrees. If more than 30 degrees, it is easy to lead to poor heat, so that the lamp surface temperature exceeds the allowable range, reducing lamp life.
 
第三、在更换和清洁uv灯时,最好不要用手直接接触灯管表面,因为油渍和汗渍会直接影响UV光的效率并影响灯管寿命。
Third, in the replacement and cleaning uv lights, it is best not to hand directly contact the surface of the lamp, because the grease and perspiration will directly affect the efficiency of UV light and affect lamp life.
 
第四、在安装uv灯时,要注意引线接触不要碰到灯头上金属部分,高温会使引线表皮破损而造成短路问题。
Fourth, in the installation of uv lights, pay attention to the lead contact Do not touch the metal part of the lamp, the high temperature will lead to damage caused by short-circuit problems.
 
第五、在工作结束时,在关闭背景墙打印机电源前,要先关UV灯,等散热风扇停转后再关电源。
Fifth, at the end of the work, turn off the background wall printer power, you must first turn off the UV lamp, and other cooling fan stop and then turn off the power.
 
  以上就是济南赢彩分享的背景墙打印机uv灯的在使用中要注意的事项和保养方法。
Above is the share of the background wall printer uv lamp in use to pay attention to the matters and maintenance methods.

产品关联:玻璃打印机 背景墙打印机 平板打印机 瓷砖打印机

在线客服

扫码与我交流