欢迎访问:济南赢彩数码科技有限公司官方网站
服务热线
187-6406-8302
当前位置:主页 > 行业动态 >

怎么选择背景墙打印机的涂层?

文章出处:www.wincolour.com 作者:colour 人气: 时间:2017-05-26 09:30 【
怎么选择背景墙打印机涂层?涂层的主要作用是增强uv墨水在材质表面的附着力,使图案能更长时间的保存,不易产生脱落、起皮等现象。市面上涂层的种类上百种,每种材质都对应不同的涂层,怎么挑选一款合适的万能平板打印机涂层呢,济南赢彩分享下面五点供大家参考学习。
How do I choose the back wall printer coating? The main role of the coating is to enhance the adhesion of uv ink on the surface of the material, so that the pattern can be more long time to save, not easy to produce off, from the skin and so on. The type of coating on the market hundreds of species, each material corresponds to a different coating, how to choose a suitable universal flatbed printer coating it, Jinan win color to share the following five points for everyone to learn.
 
@1、从承印物本身特性挑选:涂层的种类繁多,但针对每一种承印物本身的涂层确不多,那么在挑选时,一定要对上号。陶瓷的材质就需要选用陶瓷的涂层,再根据是结晶釉磁性陶瓷生物陶瓷等挑选对应的涂层。
@ 1, selected from the characteristics of the substrate itself: a wide range of coating, but for each kind of substrate itself is not much coating, then the selection, must be on the number. Ceramic material on the need to use ceramic coating, and then based on crystal glaze, magnetic ceramics, bioceramics, etc. select the corresponding coating.
 
@2、从涂层的质量挑选:涂层本身是一种化学品,质量的合格安全是首要考虑的因素,看准保质期,通常2年内的都是没问题。辨别厂家标示:外包装瓶上会清洗的注明生产场地,产品编号等信息。
@ 2, from the quality of the coating selection: the coating itself is a chemical, the quality of qualified safety is the primary consideration factors, see shelf life, usually 2 years are no problem. Identification of manufacturers marked: the packaging bottle will be marked on the production site, product number and other information.
 
@3、测试背景墙打印机涂层的温度:正常情况下,涂层放进烤箱后,在不超过300°的前提下,是不会变形扭曲、溶解掉的。如果放进烤箱后,出现了这些情况,则表明涂层的品质不行。
@ 3, test the background wall printer coating temperature: Under normal circumstances, the coating into the oven, no more than 300 ° under the premise, is not distorted, dissolved out. If put into the oven, the emergence of these conditions, then the quality of the coating does not work.
 
@4、测试涂层的附着力:选取一块干净、透明的玻璃,将涂层覆盖在上面,然后直接打印图案,待图案完成后,可用手、硬尺等工具进行刮,如果发现图案掉落、有痕迹,则表明涂层的附着力不行。
@ 4, test the adhesion of the coating: select a clean, transparent glass, the coating will be covered in the above, and then directly print the pattern, until the pattern is completed, the hand, hard ruler and other tools to scraping, if found pattern drop , There are traces, then the adhesion of the coating does not work.
 
@5、试背景墙打印机涂层的透亮度:将涂层完整的附着在透明玻璃的表面后,放置在阳光下,肉眼如果上去,透明、无暗黄色、褐色等颜色,然后轻微的晃动,涂层不会随意的扩散,则表明涂层合格的。
@5, try the background wall printer coating transparency: the coating completely attached to the transparent glass surface, placed in the sun, the naked eye if the up, transparent, no dark yellow, brown and other colors, and then slightly shaking, The coating will not spread freely, indicating that the coating is acceptable.

在线客服

扫码与我交流