欢迎访问:济南赢彩数码科技有限公司官方网站
服务热线
187-6406-8302
当前位置:主页 > 行业动态 >

玻璃打印机喷头被堵塞的八点原因

文章出处:www.wincolour.com 作者:colour 人气: 时间:2017-04-10 08:59 【

  玻璃打印机喷头被堵塞的几大因素,很多用户在使用万能打印机的时候,常常会碰到万能打印机喷头被堵塞。给我们在正常运营中带来很多的麻烦,影响生产效率。其实很多时候,喷头被堵塞是因为有很多细节我们没有注意而造成的。
Glass printer nozzle is blocked several factors, many users in the use of universal printer, often encountered universal printer nozzle was blocked. Give us a lot of trouble in the normal operation, affecting production efficiency. In fact, a lot of time, the nozzle was blocked because there are many details we do not pay attention to the cause.

 
  为了让客户在使用过程中,尽量避免遇到这些问题,下面济南赢彩玻璃打印机厂家告诉大家以下八点原因会造成喷头堵塞?
In order to allow customers in the use of the process, try to avoid encountering these problems, the following reasons to cause the nozzle blockage caused by the following eight reasons?
 
  第一、喷头电压对喷头的影响。
First, the impact of the nozzle voltage on the nozzle.
 
  第二、静电对玻璃打印机设备和墨水的影响。
Second, the impact of static electricity on glass printer equipment and ink.
 
  第三、墨水黏度过低-墨水黏度过低,墨水过于稀,喷墨速度就快,墨水喷到布上会反射回喷头,造成墨水郁积在喷嘴上,致使喷头堵塞。
Third, the ink viscosity is too low - ink viscosity is too low, the ink is too thin, inkjet speed, ink sprayed into the cloth will be reflected back to the nozzle, causing the ink stagnation on the nozzle, causing nozzle clogging.
 
  第四、清洗方式对喷头的影响-建议用软海绵或海绵签擦拭喷头,不要用普通的卫生纸。
Fourth, the cleaning method on the nozzle of the impact - it is recommended to use soft sponge or sponge swipe nozzle, do not use ordinary toilet paper.
 
  第五、墨水质量不过关,造成喷头的堵塞。
Fifth, the ink quality, but off, causing the nozzle of the plug.
 
  第六 、温度湿度的急剧变化对喷头和墨水造成破坏后对喷头的堵塞。
Sixth, the rapid changes in temperature and humidity on the nozzle and ink damage caused by the nozzle after the plug.
 
  第七 、工作习惯对喷头的影响-如吸尘器口上不能有脏物及硬物以免清洗时划伤喷头。
Seventh, the habit of working on the impact of the nozzle - such as the vacuum cleaner mouth can not have dirt and hard objects to avoid cleaning when the scratch nozzle.
 
  第八、墨水黏度过高-墨水黏度过高会造成墨水在输墨管内黏结,导致玻璃打印机供墨量不足,喷墨量不够,特别是在冬季这种现象更为突出。
Eighth, ink viscosity is too high - ink viscosity will cause the ink in the ink tube adhesion, resulting in insufficient amount of ink for the glass printer, the amount of ink is not enough, especially in the winter this phenomenon is more prominent.

在线客服

扫码与我交流