欢迎访问:济南赢彩数码科技有限公司官方网站
服务热线
187-6406-8302
当前位置:主页 > 行业动态 >

赢彩瓷砖打印机墨盒怎么保养

文章出处:www.wincolour.com 作者:colour 人气: 时间:2017-05-11 08:56 【
今天济南赢彩小编主要针对瓷砖打印机墨盒进行仔细的保养讲解,希望能够帮助用户延长墨盒使用寿命,减少因墨盒故障带来的损失。
Today, Jinan win color Xiaobian mainly for the tile printer cartridges for careful maintenance to explain, hoping to help users extend the life of the cartridge to reduce the loss caused by the cartridge failure.
 
瓷砖打印机墨盒保养方法请看下面的讲解:
Tile printer cartridges maintenance methods see the following explanation:
 
第一、使用合格油墨并确保油墨足量操作。
First, use qualified ink and ensure that the ink is running in sufficient quantities.
 
@1、油墨具有一定酸碱性,因此在选择油墨时,请注意选择能够使用的并且质量合格的油墨。
@ 1, the ink has a certain acid and alkali, so in the choice of ink, please note that you can choose to use and the quality of qualified ink.
 
@2、不同颜色和不同批次的油墨不能混合注入在一个墨盒内,否则会发生化学反应,对印刷工作都很不利。
@ 2, different colors and different batches of ink can not be mixed into a cartridge, otherwise it will be a chemical reaction, the printing work is very negative.
 
@3、确保墨盒中的墨水保持足够状态,一定记住不要让墨盒在油墨不足的情况下进行干烧,这样对墨盒零件损坏很大。
@ 3, to ensure that the ink cartridge to maintain a sufficient state, must remember not to let the ink cartridges in the case of insufficient ink to dry, so damage to the cartridge parts.
 
@4、优质油墨可以对墨盒起到保护和保养作用。
@ 4, high-quality ink can play a protective and maintenance role of ink cartridges.
 
第二、及时清洗并更换瓷砖打印机油墨。 
Second, timely cleaning and replacement of tile printer ink.
 
当需要更换油墨时,必须对墨盒进行清洗和检查。清洗后请进行干燥和排尽空气。
When the ink needs to be replaced, the cartridge must be cleaned and inspected. After cleaning, please dry and exhaust air.

@1、更换油墨时,要看好喷尽墨管内的残余墨水并进行清洗和排气。
@ 1, replace the ink, it is necessary to watch the ink inside the ink tube and cleaning and exhaust.

@2、更换完墨水后,可用闪喷或皮带打印喷掉多于三分之一的油墨量。
@ 2, after replacing the ink, you can use flash spray or belt printing spray more than one-third of the amount of ink.

@3、将墨盒重新填满,将设备关机1天。这样有助于油墨的循环系统的正常运行。
@ 3, re-fill the cartridge, the device shut down for 1 day. This contributes to the normal operation of the ink circulation system.
 
第三、供墨系统的完整清洗和保养。
Third, the ink system for a complete cleaning and maintenance.
 
供墨系统包括主板、主墨盒、供墨泵、过滤器、副墨盒、输墨管、液位传感器等。保证液位传感器处于正常运作状态,还需要清洗的部分仔细去污除尘并排气。
Ink supply system includes the main board, the main cartridge, ink pump, filter, sub-ink cartridges, ink tube, level sensors. To ensure that the level sensor is in normal operation, but also need to clean part of the careful decontamination dust and exhaust.

在线客服

扫码与我交流