欢迎访问:济南赢彩数码科技有限公司官方网站
服务热线
187-6406-8302
当前位置:主页 > 行业动态 >

瓷砖打印机喷头进气怎么办?

文章出处:www.wincolour.com 作者:colour 人气: 时间:2017-05-18 09:18 【
瓷砖打印机最为常见的是在换墨和装墨时, 喷头出现进气的时候我们该如何解决呢?下面由济南赢彩为大家做解答!
Tile printer is the most common in the ink and ink, the nozzle when the air when we how to solve it? The following win by the Jinan for everyone to do the answer!
 
@1、在给背景墙瓷砖打印机进行装墨时,由于取下了墨盒时,导致喷头非常容易进气,而且在加墨过急时,也容易造成出墨口空气排除不干净,从造成喷头进气,在打印时出现断线情况。
@ 1, to the background wall tiles printer ink, due to remove the ink cartridges, resulting in the nozzle is very easy to intake, but also in the ink when the urgency, it is also easy to cause the ink out of the air is not clean, from the nozzle Intake, there is a disconnection when printing.

@2、对于瓷砖打印机喷头进气的处理方法是,取下墨盒,用手指弹或磕打,之后再将出墨口向下放置一段时间,再将喷头装回瓷砖打印机,进行喷头清洗,时间间隔久一些,使墨水能够自然下沉。
@ 2, for the tile printer nozzle intake method is to remove the cartridge, with the finger bomb or knock, and then put the ink down the mouth for a period of time, then the nozzle back to the tile printer, the nozzle cleaning, time The interval is long, so that the ink can naturally sink.
 
@3、找一块干净的玻璃,在玻璃上放少量清水,然后将喷头浸在玻璃上的清水中几个小时,再用无尘布轻拭喷头,能喷头能顺畅渗出墨水即可。
@ 3, find a clean glass, put a small amount of water in the glass, and then immersed in the glass on the water in the water for several hours, and then clean cloth with a clean cloth nozzle, nozzle can be smooth exudation of ink can be.

@4、从通气孔向墨盒打气,加快墨水从喷头流出即可。
@ 4, from the vent hole to the cartridge to cheer, speed up the ink from the nozzle can be out.
 
上诉就是关于背景墙瓷砖打印机喷头进气的解决办法,希望能帮助到大家。
Appeal is about the background wall tiles printer nozzle intake of the solution, hoping to help everyone.

 

在线客服

扫码与我交流